Other

EAC; 100% production dielectric tested; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; UR – ANSI/UL 758; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; RoHS compliant; Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A; CE, ERIFLEX FLEXADV – EN 61439-1; UL – UL94-V0; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; No lugs needed, reducing installation time and improving resistance to vibration; IEC 60695-2-12 – IEC 60695-2-12; Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar; Weight savings and material savings compared to wire alternatives; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); CSA – C22.2 No 210; Reduces total installation cost; Thin layers of tinned electrolytic copper formed into a stack; Tinned copper allows for copper or aluminum conductor connections; Bureau Veritas – ACE 14/163/02; Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility; EN 45545-2 – EN 45545-2; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; ISO 5659-2 – ISO 5659-2; IEC 61439-1 – IEC 61439-1; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; IEC 61439-1 Class II – IEC 61439-1 Class II; Dramatically smaller and more flexible than comparable cable based on ampacity; ABS; RoHS; Traceability codes and designation part numbers printed on insulation; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; Better power density than cable with lower skin effect ratio

Bureau Veritas – ACE 14/163/02; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; RoHS; ABS; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; IEC 60695-2-12 – IEC 60695-2-12; RoHS compliant; EN 45545-2 – EN 45545-2; CE, ERIFLEX FLEXADV – EN 61439-1; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Traceability codes and designation part numbers printed on insulation; Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); UL – UL94-V0; EAC; No lugs needed, reducing installation time and improving resistance to vibration; ISO 5659-2 – ISO 5659-2; UR – ANSI/UL 67, ANSI/UL 891; Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar; Tinned copper allows for copper or aluminum conductor connections; Better power density than cable with lower skin effect ratio; Dramatically smaller and more flexible than comparable cable based on ampacity; IEC 61439-1 – IEC 61439-1; Thin layers of tinned electrolytic copper formed into a stack; Reduces total installation cost; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility; 100% production dielectric tested; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; IEC 61439-1 Class II – IEC 61439-1 Class II; Weight savings and material savings compared to wire alternatives; CSA – C22.2 No 210

Weight savings and material savings compared to wire alternatives; Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; IEC 61439-1 Class II – IEC 61439-1 Class II; UR – ANSI/UL 758; Traceability codes and designation part numbers printed on insulation; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; ABS; IEC 61439-1 – IEC 61439-1; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; Tinned copper allows for copper or aluminum conductor connections; RoHS; Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility; ISO 5659-2 – ISO 5659-2; No lugs needed, reducing installation time and improving resistance to vibration; EN 45545-2 – EN 45545-2; UL – UL94-V0; UR – ANSI/UL 67, ANSI/UL 891; Better power density than cable with lower skin effect ratio; Reduces total installation cost; 100% production dielectric tested; Bureau Veritas – ACE 14/163/02; Thin layers of tinned electrolytic copper formed into a stack; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; CE, ERIFLEX FLEXADV – EN 61439-1; Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A; Dramatically smaller and more flexible than comparable cable based on ampacity; EAC; IEC 60695-2-12 – IEC 60695-2-12; RoHS compliant

Integral palm without lugs or terminals reduces material and assembly weight; Insulated by high-resistance, halogen free, flame retardant and low smoke material; DNV GL® and Bureau Veritas certified for marine and offshore applications; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; EAC; Quick and easy installation; Resistant to vibration, improving reliability and performance; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; EN 45545-2 – EN 45545-2; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; Suitable for all main molded case circuit breakers; UR – ANSI/UL 67, ANSI/UL 891; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; No additional cutting, stripping, crimping and punching needed; Dramatically smaller and more flexible than comparable cable based on ampacity; Better power density than cable with lower skin effect ratio; IEC 61439-1 Class II – IEC 61439-1 Class II; RoHS; IEC 60695-2-12 – IEC 60695-2-12; Improves assembly flexibility and aesthetics; Small wire diameter provides maximum flexibility; UR – ANSI/UL 758; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; CE; UL – UL94-V0; Reduces total installation cost; RoHS compliant; Tinned copper allows for copper or aluminum conductor connections; ISO 5659-2 – ISO 5659-2; ABS; CSA – C22.2 No 210; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); IEC 61439-1 – IEC 61439-1; DNV GL – DNV GL Rules; Tinned copper provides superior corrosion resistance; Bureau Veritas – ACE 14/163/3

Better power density than cable with lower skin effect ratio; IEC 61439-1 – IEC 61439-1; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; ISO 5659-2 – ISO 5659-2; CE; EAC; Insulated by high-resistance, halogen free, flame retardant and low smoke material; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UR – ANSI/UL 758; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Quick and easy installation; IEC 61439-1 Class II – IEC 61439-1 Class II; UR – ANSI/UL 67, ANSI/UL 891; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); Bureau Veritas – ACE 14/163/3; IEC 60695-2-12 – IEC 60695-2-12; Improves assembly flexibility and aesthetics; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; DNV GL® and Bureau Veritas certified for marine and offshore applications; RoHS compliant; Resistant to vibration, improving reliability and performance; No additional cutting, stripping, crimping and punching needed; DNV GL – DNV GL Rules; Tinned copper provides superior corrosion resistance; Integral palm without lugs or terminals reduces material and assembly weight; RoHS; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; CSA – C22.2 No 210; UL – UL94-V0; Small wire diameter provides maximum flexibility; ABS; Suitable for all main molded case circuit breakers; EN 45545-2 – EN 45545-2; Tinned copper allows for copper or aluminum conductor connections; Dramatically smaller and more flexible than comparable cable based on ampacity; Reduces total installation cost

ISO 5659-2 – ISO 5659-2; IEC 60695-2-12 – IEC 60695-2-12; Insulated by high-resistance, halogen free, flame retardant and low smoke material; EAC; Small wire diameter provides maximum flexibility; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Improves assembly flexibility and aesthetics; Suitable for all main molded case circuit breakers; Bureau Veritas – ACE 14/163/3; No additional cutting, stripping, crimping and punching needed; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); Tinned copper allows for copper or aluminum conductor connections; Resistant to vibration, improving reliability and performance; CSA – C22.2 No 210; IEC 61439-1 – IEC 61439-1; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; DNV GL – DNV GL Rules; Tinned copper provides superior corrosion resistance; IEC 61439-1 Class II – IEC 61439-1 Class II; RoHS compliant; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Reduces total installation cost; UR – ANSI/UL 758; ABS; EN 45545-2 – EN 45545-2; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; Integral palm without lugs or terminals reduces material and assembly weight; CE; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; UR – ANSI/UL 67, ANSI/UL 891; DNV GL® and Bureau Veritas certified for marine and offshore applications; UL – UL94-V0; Quick and easy installation; Better power density than cable with lower skin effect ratio; RoHS; Dramatically smaller and more flexible than comparable cable based on ampacity

Bureau Veritas – ACE 14/163/3; UL – UL94-V0; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; ABS; Improves assembly flexibility and aesthetics; Resistant to vibration, improving reliability and performance; No additional cutting, stripping, crimping and punching needed; Quick and easy installation; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Dramatically smaller and more flexible than comparable cable based on ampacity; Tinned copper provides superior corrosion resistance; DNV GL® and Bureau Veritas certified for marine and offshore applications; ISO 5659-2 – ISO 5659-2; IEC 60695-2-12 – IEC 60695-2-12; Tinned copper allows for copper or aluminum conductor connections; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; UR – ANSI/UL 758; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); Small wire diameter provides maximum flexibility; Suitable for all main molded case circuit breakers; Insulated by high-resistance, halogen free, flame retardant and low smoke material; DNV GL – DNV GL Rules; Integral palm without lugs or terminals reduces material and assembly weight; RoHS; EN 45545-2 – EN 45545-2; CE; Better power density than cable with lower skin effect ratio; RoHS compliant; IEC 61439-1 Class II – IEC 61439-1 Class II; IEC 61439-1 – IEC 61439-1; Reduces total installation cost; CSA – C22.2 No 210; EAC

IEC 61439-1 Class II – IEC 61439-1 Class II; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); Dramatically smaller and more flexible than comparable cable based on ampacity; IEC 61439-1 – IEC 61439-1; EN 45545-2 – EN 45545-2; Resistant to vibration, improving reliability and performance; DNV GL – DNV GL Rules; Bureau Veritas – ACE 14/163/3; Quick and easy installation; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; No additional cutting, stripping, crimping and punching needed; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; IEC 60695-2-12 – IEC 60695-2-12; UR – ANSI/UL 67, ANSI/UL 891; RoHS; ABS; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Tinned copper allows for copper or aluminum conductor connections; CSA – C22.2 No 210; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; EAC; DNV GL® and Bureau Veritas certified for marine and offshore applications; Insulated by high-resistance, halogen free, flame retardant and low smoke material; Small wire diameter provides maximum flexibility; ISO 5659-2 – ISO 5659-2; Reduces total installation cost; UL – UL94-V0; CE; Suitable for all main molded case circuit breakers; Tinned copper provides superior corrosion resistance; Better power density than cable with lower skin effect ratio; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; Improves assembly flexibility and aesthetics; Integral palm without lugs or terminals reduces material and assembly weight; UR – ANSI/UL 758; RoHS compliant

CE; IEC 61439-1 Class II – IEC 61439-1 Class II; Resistant to vibration, improving reliability and performance; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; Suitable for all main molded case circuit breakers; IEC 61439-1 – IEC 61439-1; Insulated by high-resistance, halogen free, flame retardant and low smoke material; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Better power density than cable with lower skin effect ratio; RoHS compliant; Reduces total installation cost; DNV GL® and Bureau Veritas certified for marine and offshore applications; IEC 60695-2-12 – IEC 60695-2-12; ISO 5659-2 – ISO 5659-2; Bureau Veritas – ACE 14/163/3; CSA – C22.2 No 210; DNV GL – DNV GL Rules; Small wire diameter provides maximum flexibility; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; ABS; EN 45545-2 – EN 45545-2; Tinned copper provides superior corrosion resistance; UL – UL94-V0; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Integral palm without lugs or terminals reduces material and assembly weight; Tinned copper allows for copper or aluminum conductor connections; Dramatically smaller and more flexible than comparable cable based on ampacity; No additional cutting, stripping, crimping and punching needed; Improves assembly flexibility and aesthetics; RoHS; EAC; Quick and easy installation; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); CE, ERIFLEX IBSADV? – EN IEC 61439-1?

UR – ANSI/UL 758; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Dramatically smaller and more flexible than comparable cable based on ampacity; Bureau Veritas – ACE 14/163/3; UR – ANSI/UL 67, ANSI/UL 891; Insulated by high-resistance, halogen free, flame retardant and low smoke material; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; RoHS; Quick and easy installation; EN 45545-2 – EN 45545-2; Tinned copper allows for copper or aluminum conductor connections; EAC; DNV GL® and Bureau Veritas certified for marine and offshore applications; CSA – C22.2 No 210; Small wire diameter provides maximum flexibility; Reduces total installation cost; IEC 60695-2-12 – IEC 60695-2-12; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; IEC 61439-1 Class II – IEC 61439-1 Class II; RoHS compliant; ISO 5659-2 – ISO 5659-2; ABS; Better power density than cable with lower skin effect ratio; No additional cutting, stripping, crimping and punching needed; IEC 61439-1 – IEC 61439-1; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; Suitable for all main molded case circuit breakers; Integral palm without lugs or terminals reduces material and assembly weight; Tinned copper provides superior corrosion resistance; Improves assembly flexibility and aesthetics; DNV GL – DNV GL Rules; UL – UL94-V0; Resistant to vibration, improving reliability and performance; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; CE