Search in Category
Search Filters
-
nVent Eriflex x
Filter Your Search
Shop by Category
Other
ERIFLEX FLEXIBAR 3MTC 6X20X1
Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; 100% production dielectric tested; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); RoHS compliant; ABS; Weight savings and material savings compared to wire alternatives; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Bureau Veritas – ACE 14/163/02; Traceability codes and designation part numbers printed on insulation; RoHS; CE, ERIFLEX FLEXIBAR – EN 61439-1; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 67, ANSI/UL 891; Dramatically smaller and more flexible than comparable cable based on ampacity; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Reduces total installation cost; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 758
ERIFLEX FLEXIBAR 3MTC 6X32X1
Traceability codes and designation part numbers printed on insulation; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 67, ANSI/UL 891; EAC compliant; UR – ANSI/UL 758; Bureau Veritas – ACE 14/163/02; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Dramatically smaller and more flexible than comparable cable based on ampacity; 100% production dielectric tested; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Reduces total installation cost; ABS; RoHS compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; No lugs needed, reducing installation time and improving resistance to vibration; Better power density than cable with lower skin effect ratio; Weight savings and material savings compared to wire alternatives; RoHS; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld
ERIFLEX FLEXIBAR 3MTC 8X32X1
Thin layers of tinned electrolytic copper formed into a stack; ABS; RoHS; UR – ANSI/UL 67, ANSI/UL 891; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; CE, ERIFLEX FLEXIBAR – EN 61439-1; Weight savings and material savings compared to wire alternatives; Traceability codes and designation part numbers printed on insulation; UR – ANSI/UL 758; Tinned copper allows for copper or aluminum conductor connections; Bureau Veritas – ACE 14/163/02; EAC compliant; No lugs needed, reducing installation time and improving resistance to vibration; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Better power density than cable with lower skin effect ratio; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; 100% production dielectric tested; Reduces total installation cost; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Dramatically smaller and more flexible than comparable cable based on ampacity; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; RoHS compliant; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F)
ERIFLEX FLEXIBAR 3MTC 3X50X1
Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; ABS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; UR – ANSI/UL 758; 100% production dielectric tested; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); EAC compliant; Thin layers of tinned electrolytic copper formed into a stack; Better power density than cable with lower skin effect ratio; Tinned copper allows for copper or aluminum conductor connections; CE, ERIFLEX FLEXIBAR – EN 61439-1; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Bureau Veritas – ACE 14/163/02; Weight savings and material savings compared to wire alternatives; Traceability codes and designation part numbers printed on insulation; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Dramatically smaller and more flexible than comparable cable based on ampacity; RoHS compliant; UR – ANSI/UL 67, ANSI/UL 891; Reduces total installation cost
ERIFLEX FLEXIBAR 3MTC 4X50X1
Thin layers of tinned electrolytic copper formed into a stack; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Dramatically smaller and more flexible than comparable cable based on ampacity; CE, ERIFLEX FLEXIBAR – EN 61439-1; Bureau Veritas – ACE 14/163/02; UR – ANSI/UL 758; Reduces total installation cost; 100% production dielectric tested; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; ABS; Traceability codes and designation part numbers printed on insulation; RoHS; Weight savings and material savings compared to wire alternatives; Better power density than cable with lower skin effect ratio; Tinned copper allows for copper or aluminum conductor connections; EAC compliant
ERIFLEX FLEXIBAR 3MTC 5X50X1
CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Thin layers of tinned electrolytic copper formed into a stack; RoHS compliant; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; Weight savings and material savings compared to wire alternatives; Tinned copper allows for copper or aluminum conductor connections; Dramatically smaller and more flexible than comparable cable based on ampacity; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Reduces total installation cost; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; 100% production dielectric tested; Bureau Veritas – ACE 14/163/02; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; ABS; EAC compliant; No lugs needed, reducing installation time and improving resistance to vibration; Traceability codes and designation part numbers printed on insulation; Better power density than cable with lower skin effect ratio; CE, ERIFLEX FLEXIBAR – EN 61439-1; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; RoHS
ERIFLEX FLEXIBAR 2MTC 4X155X08
RoHS compliant; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Tinned copper allows for copper or aluminum conductor connections; Reduces total installation cost; EAC compliant; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 67, ANSI/UL 891; 100% production dielectric tested; UR – ANSI/UL 758; RoHS; Weight savings and material savings compared to wire alternatives; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; CE, ERIFLEX FLEXIBAR – EN 61439-1; Better power density than cable with lower skin effect ratio; Thin layers of tinned electrolytic copper formed into a stack; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Traceability codes and designation part numbers printed on insulation; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Dramatically smaller and more flexible than comparable cable based on ampacity; ABS; Bureau Veritas – ACE 14/163/02
ERIFLEX FLEXIBAR 3MTC 5X100X1
UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; UR – ANSI/UL 67, ANSI/UL 891; Bureau Veritas – ACE 14/163/02; Dramatically smaller and more flexible than comparable cable based on ampacity; RoHS compliant; Thin layers of tinned electrolytic copper formed into a stack; RoHS; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; No lugs needed, reducing installation time and improving resistance to vibration; ABS; Better power density than cable with lower skin effect ratio; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; Weight savings and material savings compared to wire alternatives; Reduces total installation cost; 100% production dielectric tested; Tinned copper allows for copper or aluminum conductor connections; Traceability codes and designation part numbers printed on insulation; CE, ERIFLEX FLEXIBAR – EN 61439-1
ERIFLEX FLEXIBAR 3MTC 6X100X1
EAC compliant; No lugs needed, reducing installation time and improving resistance to vibration; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Dramatically smaller and more flexible than comparable cable based on ampacity; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); RoHS; Better power density than cable with lower skin effect ratio; ABS; Reduces total installation cost; Traceability codes and designation part numbers printed on insulation; Weight savings and material savings compared to wire alternatives; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; UR – ANSI/UL 758; CE, ERIFLEX FLEXIBAR – EN 61439-1; Bureau Veritas – ACE 14/163/02; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS compliant; 100% production dielectric tested; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244
Spare Blade Set for MFC
RoHS; Replacement blade for legacy MFC nVent ERIFLEX Flexibar Shearing Tool