Connectors

100% production dielectric tested; Reduces total installation cost; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS; Bureau Veritas – ACE 14/163/02; Tinned copper allows for copper or aluminum conductor connections; UR – ANSI/UL 67, ANSI/UL 891; Thin layers of tinned electrolytic copper formed into a stack; Better power density than cable with lower skin effect ratio; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; ABS; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; RoHS compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; CE, ERIFLEX FLEXIBAR – EN 61439-1; Dramatically smaller and more flexible than comparable cable based on ampacity; Weight savings and material savings compared to wire alternatives; No lugs needed, reducing installation time and improving resistance to vibration; Traceability codes and designation part numbers printed on insulation; EAC compliant

Reduces total installation cost; Thin layers of tinned electrolytic copper formed into a stack; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; 100% production dielectric tested; ABS; UR – ANSI/UL 67, ANSI/UL 891; Weight savings and material savings compared to wire alternatives; Bureau Veritas – ACE 14/163/02; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; UR – ANSI/UL 758; Tinned copper allows for copper or aluminum conductor connections; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Better power density than cable with lower skin effect ratio; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Dramatically smaller and more flexible than comparable cable based on ampacity; RoHS compliant; Traceability codes and designation part numbers printed on insulation; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CE, ERIFLEX FLEXIBAR – EN 61439-1

Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; 100% production dielectric tested; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); RoHS compliant; ABS; Weight savings and material savings compared to wire alternatives; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Bureau Veritas – ACE 14/163/02; Traceability codes and designation part numbers printed on insulation; RoHS; CE, ERIFLEX FLEXIBAR – EN 61439-1; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 67, ANSI/UL 891; Dramatically smaller and more flexible than comparable cable based on ampacity; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Reduces total installation cost; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 758

CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; No lugs needed, reducing installation time and improving resistance to vibration; Tinned copper allows for copper or aluminum conductor connections; Better power density than cable with lower skin effect ratio; Bureau Veritas – ACE 14/163/02; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Thin layers of tinned electrolytic copper formed into a stack; Weight savings and material savings compared to wire alternatives; Dramatically smaller and more flexible than comparable cable based on ampacity; 100% production dielectric tested; RoHS compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); ABS; RoHS; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; Traceability codes and designation part numbers printed on insulation; CE, ERIFLEX FLEXIBAR – EN 61439-1; Reduces total installation cost; EAC compliant

CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UR – ANSI/UL 758; Reduces total installation cost; Bureau Veritas – ACE 14/163/02; RoHS compliant; Weight savings and material savings compared to wire alternatives; Thin layers of tinned electrolytic copper formed into a stack; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Traceability codes and designation part numbers printed on insulation; CE, ERIFLEX FLEXIBAR – EN 61439-1; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; ABS; RoHS; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; EAC compliant; 100% production dielectric tested; Dramatically smaller and more flexible than comparable cable based on ampacity; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Tinned copper allows for copper or aluminum conductor connections; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 67, ANSI/UL 891; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration

Traceability codes and designation part numbers printed on insulation; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 67, ANSI/UL 891; EAC compliant; UR – ANSI/UL 758; Bureau Veritas – ACE 14/163/02; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Dramatically smaller and more flexible than comparable cable based on ampacity; 100% production dielectric tested; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Reduces total installation cost; ABS; RoHS compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; No lugs needed, reducing installation time and improving resistance to vibration; Better power density than cable with lower skin effect ratio; Weight savings and material savings compared to wire alternatives; RoHS; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld

Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; ABS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; UR – ANSI/UL 758; 100% production dielectric tested; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); EAC compliant; Thin layers of tinned electrolytic copper formed into a stack; Better power density than cable with lower skin effect ratio; Tinned copper allows for copper or aluminum conductor connections; CE, ERIFLEX FLEXIBAR – EN 61439-1; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Bureau Veritas – ACE 14/163/02; Weight savings and material savings compared to wire alternatives; Traceability codes and designation part numbers printed on insulation; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Dramatically smaller and more flexible than comparable cable based on ampacity; RoHS compliant; UR – ANSI/UL 67, ANSI/UL 891; Reduces total installation cost

Thin layers of tinned electrolytic copper formed into a stack; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Dramatically smaller and more flexible than comparable cable based on ampacity; CE, ERIFLEX FLEXIBAR – EN 61439-1; Bureau Veritas – ACE 14/163/02; UR – ANSI/UL 758; Reduces total installation cost; 100% production dielectric tested; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; ABS; Traceability codes and designation part numbers printed on insulation; RoHS; Weight savings and material savings compared to wire alternatives; Better power density than cable with lower skin effect ratio; Tinned copper allows for copper or aluminum conductor connections; EAC compliant

UR – ANSI/UL 67, ANSI/UL 891; EAC compliant; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; RoHS; Weight savings and material savings compared to wire alternatives; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Traceability codes and designation part numbers printed on insulation; 100% production dielectric tested; Thin layers of tinned electrolytic copper formed into a stack; Dramatically smaller and more flexible than comparable cable based on ampacity; Reduces total installation cost; ABS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Tinned copper allows for copper or aluminum conductor connections; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; RoHS compliant; Bureau Veritas – ACE 14/163/02; CE, ERIFLEX FLEXIBAR – EN 61439-1