Connectors

IEC 61439-1 Class II – IEC 61439-1 Class II; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); Dramatically smaller and more flexible than comparable cable based on ampacity; IEC 61439-1 – IEC 61439-1; EN 45545-2 – EN 45545-2; Resistant to vibration, improving reliability and performance; DNV GL – DNV GL Rules; Bureau Veritas – ACE 14/163/3; Quick and easy installation; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; No additional cutting, stripping, crimping and punching needed; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; IEC 60695-2-12 – IEC 60695-2-12; UR – ANSI/UL 67, ANSI/UL 891; RoHS; ABS; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Tinned copper allows for copper or aluminum conductor connections; CSA – C22.2 No 210; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; EAC; DNV GL® and Bureau Veritas certified for marine and offshore applications; Insulated by high-resistance, halogen free, flame retardant and low smoke material; Small wire diameter provides maximum flexibility; ISO 5659-2 – ISO 5659-2; Reduces total installation cost; UL – UL94-V0; CE; Suitable for all main molded case circuit breakers; Tinned copper provides superior corrosion resistance; Better power density than cable with lower skin effect ratio; CE, ERIFLEX IBSADV? – EN IEC 61439-1?; Improves assembly flexibility and aesthetics; Integral palm without lugs or terminals reduces material and assembly weight; UR – ANSI/UL 758; RoHS compliant

UL – ANSI/UL 467; Bureau Veritas; EAC compliant; cUL – CSA C22.2 No. 41; Recommended by the EMC/EMI directives and less impedance than cables; Quick and easy to install; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; Complete range of earth/ground flexible connections from 6 – 100 mm² (11.84 – 197.35 kcmil) cross section and from 100 – 500 mm (3.937” – 19.685”) length; Ready to use out of the box, eliminates the need for cutting, stripping, crimping and punching; Resistant to vibration and fatigue, reducing maintenance; RoHS compliant; RoHS; UKCA, ERIFLEX MBJ – EN 61439-1; Provides weight savings, material savings and lower impedance when compared to similar lugged cables with insulation; Integral palm, without tin or crimped lugs for superior electrical contact and tensile strength resistance

RoHS compliant; UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC; High resistance to leakage current; Great stability of electrical and mechanical parameters; Halogen free; RoHS; CSA-Comp – CSA C22.2 No. 29; UR – ANSI/UL 67, ANSI/UL 891; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244

UKCA, ERIFLEX TD – EN 60947-7-1; CE, ERIFLEX TD – EN 60947-7-1; RoHS; RoHS compliant; Solid bars provide reliability; EN 45545 – EN 45545-2:2013; Conforms to EN 45545 obtaining an HL3 classification for chapter R23 and HL2 classification for chapter R22; Easy and safe connections; Insulating screen between each row; Halogen free; Protection cover and insulating screens are transparent; Easily clips onto DIN rail or mounts to panel with screws; Minimum space for maximum power; Wiring with or without terminal

Reduces total installation cost; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Weight savings and material savings compared to wire alternatives; RoHS; Traceability codes and designation part numbers printed on insulation; UR – ANSI/UL 67, ANSI/UL 891; CE, ERIFLEX FLEXIBAR – EN 61439-1; EAC compliant; ABS; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Thin layers of tinned electrolytic copper formed into a stack; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Dramatically smaller and more flexible than comparable cable based on ampacity; Better power density than cable with lower skin effect ratio; 100% production dielectric tested; No lugs needed, reducing installation time and improving resistance to vibration; Tinned copper allows for copper or aluminum conductor connections; RoHS compliant; UR – ANSI/UL 758; Bureau Veritas – ACE 14/163/02

CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Better power density than cable with lower skin effect ratio; Traceability codes and designation part numbers printed on insulation; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Reduces total installation cost; UR – ANSI/UL 758; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; Tinned copper allows for copper or aluminum conductor connections; EAC compliant; Dramatically smaller and more flexible than comparable cable based on ampacity; Bureau Veritas – ACE 14/163/02; ABS; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 67, ANSI/UL 891; Thin layers of tinned electrolytic copper formed into a stack; 100% production dielectric tested; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Weight savings and material savings compared to wire alternatives; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS compliant

Traceability codes and designation part numbers printed on insulation; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); EAC compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; 100% production dielectric tested; ABS; RoHS; Thin layers of tinned electrolytic copper formed into a stack; Dramatically smaller and more flexible than comparable cable based on ampacity; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Reduces total installation cost; No lugs needed, reducing installation time and improving resistance to vibration; Weight savings and material savings compared to wire alternatives; Tinned copper allows for copper or aluminum conductor connections; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; RoHS compliant; Better power density than cable with lower skin effect ratio; Bureau Veritas – ACE 14/163/02; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld

Dramatically smaller and more flexible than comparable cable based on ampacity; Reduces total installation cost; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; No lugs needed, reducing installation time and improving resistance to vibration; Bureau Veritas – ACE 14/163/02; Traceability codes and designation part numbers printed on insulation; Thin layers of tinned electrolytic copper formed into a stack; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); UR – ANSI/UL 758; Better power density than cable with lower skin effect ratio; ABS; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Tinned copper allows for copper or aluminum conductor connections; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; 100% production dielectric tested; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 67, ANSI/UL 891; RoHS compliant; EAC compliant; Weight savings and material savings compared to wire alternatives

Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 67, ANSI/UL 891; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Tinned copper allows for copper or aluminum conductor connections; Bureau Veritas – ACE 14/163/02; RoHS; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 758; Thin layers of tinned electrolytic copper formed into a stack; Dramatically smaller and more flexible than comparable cable based on ampacity; 100% production dielectric tested; RoHS compliant; Traceability codes and designation part numbers printed on insulation; ABS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Weight savings and material savings compared to wire alternatives; EAC compliant; Reduces total installation cost

CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Bureau Veritas – ACE 14/163/02; 100% production dielectric tested; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Weight savings and material savings compared to wire alternatives; ABS; Better power density than cable with lower skin effect ratio; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Traceability codes and designation part numbers printed on insulation; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 67, ANSI/UL 891; RoHS compliant; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 758; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Reduces total installation cost; Dramatically smaller and more flexible than comparable cable based on ampacity; EAC compliant